Bushing set for replacement of the front bushing on the rear trailing arm
$653,90
Description
Volvo S60, S80, V60, V70, XC60 and XC70 2007- 2016 Ford Mondeo, S Max, Galaxy 2007-2015.
Using the tool the rear suspension bushing can be replaced directly on the vehicle with a minimum of dismantling.
Only takes 30 minutes per side.
The exposed position of the bushing results in rust and difficulty in removing, the recommended cylinders are from 14 - 22 ton and are screwed in to the press block. Do not load the block or bushing with more than 16 ton!
Used with cylinder 01-00060 /1090-03 (or previous models 01-00030 or 1090-02-WAL) not included in the set.
Contains these parts:
01-00022-020 - Press fixture
01-00022-003 - Press pipe
01-00022-004 - Thrust washer
01-00022-005 - Adapter ring
2x 1090-60-01 - Plate with thread
1090-60-04 - Bolt M16x40mm
Using the tool the rear suspension bushing can be replaced directly on the vehicle with a minimum of dismantling.
Only takes 30 minutes per side.
The exposed position of the bushing results in rust and difficulty in removing, the recommended cylinders are from 14 - 22 ton and are screwed in to the press block. Do not load the block or bushing with more than 16 ton!
Used with cylinder 01-00060 /1090-03 (or previous models 01-00030 or 1090-02-WAL) not included in the set.
Contains these parts:
01-00022-020 - Press fixture
01-00022-003 - Press pipe
01-00022-004 - Thrust washer
01-00022-005 - Adapter ring
2x 1090-60-01 - Plate with thread
1090-60-04 - Bolt M16x40mm
SKU
01-00022
Weight
7.9 kg
Free shipping over $500